Comments on: Yamaha Mixers Added to Podcastrigs Systems http://podcastacademy.com/2005/03/28/yamaha-mixers-added-to-podcastrigs-systems/ Wed, 18 Jan 2012 18:15:08 -0800 hourly 1 http://wordpress.org/?v=3.1.3 By: Andy http://podcastacademy.com/2005/03/28/yamaha-mixers-added-to-podcastrigs-systems/comment-page-1/#comment-531 Andy Thu, 01 Dec 2005 23:57:02 +0000 http://podcastrigs.com/?p=24#comment-531 Do you mean the INSERT I/O socket that can be found on channel 1 or 2? So the cable would be this one? http://www.dolphinmusic.co.uk/shop_image/product/f34d205f4370f8614b39ddb43c6e3818.jpg And does it go into the Send and Return INSERT sockets on the VX2496? I presume this then dedicates this effector to the single condenser mic that you'll have plugged into the VX2496? Finally, the manual seems to be showing that you can connect it up via the Aux Send and Return jack points near the headphone socket on the MG10/2? Would this set up work for the whole mixer before going off to the audio interface that connects with my firewire socket to my ibook rather than dedicated to just the microphone? If so, would it be the same cable as above? Andy Do you mean the INSERT I/O socket that can be found on channel 1 or 2? So the cable would be this one?

http://www.dolphinmusic.co.uk/shop_image/product/f34d205f4370f8614b39ddb43c6e3818.jpg

And does it go into the Send and Return INSERT sockets on the VX2496?

I presume this then dedicates this effector to the single condenser mic that you’ll have plugged into the VX2496?

Finally, the manual seems to be showing that you can connect it up via the Aux Send and Return jack points near the headphone socket on the MG10/2? Would this set up work for the whole mixer before going off to the audio interface that connects with my firewire socket to my ibook rather than dedicated to just the microphone?

If so, would it be the same cable as above?

Andy

]]> By: Administrator http://podcastacademy.com/2005/03/28/yamaha-mixers-added-to-podcastrigs-systems/comment-page-1/#comment-526 Administrator Thu, 01 Dec 2005 02:44:02 +0000 http://podcastrigs.com/?p=24#comment-526 Use the channel insert on your Mic channel. An insert cable is required for this: http://www.monstercable.com/pro_audio/productPagePro.asp?pin=2320&LastPage=Interconnects -ptfigg. Use the channel insert on your Mic channel. An insert cable is required for this:

http://www.monstercable.com/pro_audio/productPagePro.asp?pin=2320&LastPage=Interconnects

-ptfigg.

]]> By: Andy http://podcastacademy.com/2005/03/28/yamaha-mixers-added-to-podcastrigs-systems/comment-page-1/#comment-525 Andy Thu, 01 Dec 2005 02:00:06 +0000 http://podcastrigs.com/?p=24#comment-525 Anyone know the best way to hook the VX2496 device into this MG10/2 mixer? I'm thinking of getting a VX2496 to add to my mixer but not sure how I'd hook it up and what cables and how many of them to use... Anyone know the best way to hook the VX2496 device into this MG10/2 mixer? I’m thinking of getting a VX2496 to add to my mixer but not sure how I’d hook it up and what cables and how many of them to use…

]]>